The C-TOP Reed control unit can adapt to any INOXPA actuator, and both efficiently and individually automate pneumatically driven process valves. These include: butterfly, ball or single or double seat valves.
C-TOP REED Steuereinheit
C-TOP REED Steuereinheit
Information
C-TOP REED Steuereinheit
Information
C-TOP REED Steuereinheit
Funktionsweise
The control head contains up to a maximum of three solenoid valves, two magnetic targets and an electronic module formed by three sensors connected to the three visual indicators (LEDs). The solenoid valves which control and act on the valve are activated through external signals. At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head. The control head includes DIP switches that allow obtaining different configurations to adapt the control head to the different types of valves.
Aufbau und Kenndaten
The C-TOP Reed installs easily onto the top of the valve’s actuator.
Quick and simple configuration.
Line detection using magnetic Reed type sensors.
Use of up to three solenoid valves possible.
360º vies of lights indicating valve status.
Materialien
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
Dokument
Technisches datenblatt (4)
Quick installation guide (1)
Bedienungsanleitung (4)
Funktionsweise
The control head contains up to a maximum of three solenoid valves, two magnetic targets and an electronic module formed by three sensors connected to the three visual indicators (LEDs). The solenoid valves which control and act on the valve are activated through external signals. At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head. The control head includes DIP switches that allow obtaining different configurations to adapt the control head to the different types of valves.
Materialien and Optionen
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
Dokument
| Dokument N° | 10.427.33.01ES |
| Titel | C-TOP Reed Cabezal de Control |
| Dateityp | |
|
|
| Dokument N° | 10.427.33.01EN |
| Titel | C-TOP Reed Control Unit |
| Dateityp | |
|
|
| Dokument N° | 10.427.33.01FR |
| Titel | C-TOP Reed Tête de commande |
| Dateityp | |
|
|
| Dokument N° | 10.427.33.01RU |
| Titel | C-TOP Reed Контрольное устройство |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.04MU |
| Titel | Quick installation guide / Guía rápida de instalación / Guide d’installation rapide / Краткое руководство по монтажу C-TOP Reed |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.01ES |
| Titel | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO CABEZAL DE CONTROL C-TOP REED |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.01EN |
| Titel | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS CONTROL HEAD C-TOP REED |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.01FR |
| Titel | INSTRUCTIONS RELATIVES À L’INSTALLATION, À LA MISE EN SERVICE ET À LA MAINTENANCE TÊTE DE COMMANDE C-TOP REED |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.01RU |
| Titel | ИНСТРУКЦИИ ПО УСТАНОВК КОНТРОЛЬНОЕ УСТРОЙСТВО C-TOP REED, ЭКСПЛУАТАЦИИ И ОБСЛУЖИВАНИЮ |
| Dateityp | |
|
|
Verwandte Produkte
