The C-TOP B control unit can adapt to any INOXPA actuator and both efficiently and individually automate pneumatically driven process valves.
These include butterfly, ball or single or double seat valves with single-acting actuator.
C-TOP B Steuereinheit
C-TOP B Steuereinheit
Information
C-TOP B Steuereinheit
Information
C-TOP B Steuereinheit
Funktionsweise
The control head works with or without a solenoid valve. It contains two magnetic targets fixed to the adapter shaft and an electronic module formed by three sensors connected to the three visual indicators (LEDs).
Through external signals, the solenoid valve which controls and acts on the valve is activated.
At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head.
The control head includes DIP switches that allow obtaining different configurations of the output signals to adapt the control head to the different types of valves.
Aufbau und Kenndaten
The C-TOP B installs easily onto the top of the valve’s actuator.
Quick and simple configuration.
Line detection using magnetic Reed type sensors.
360º vies of lights indicating valve status.
Materialien
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
Dokument
Technisches datenblatt (4)
Quick installation guide (2)
Bedienungsanleitung (4)
Funktionsweise
The control head works with or without a solenoid valve. It contains two magnetic targets fixed to the adapter shaft and an electronic module formed by three sensors connected to the three visual indicators (LEDs).
Through external signals, the solenoid valve which controls and acts on the valve is activated.
At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head.
The control head includes DIP switches that allow obtaining different configurations of the output signals to adapt the control head to the different types of valves.
Materialien and Optionen
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
Dokument
| Dokument N° | 10.427.33.02ES |
| Titel | C-TOP B Cabezal de Control |
| Dateityp | |
|
|
| Dokument N° | 10.427.33.02EN |
| Titel | C-TOP B Control Unit |
| Dateityp | |
|
|
| Dokument N° | 10.427.33.02FR |
| Titel | C-TOP B Tête de commande |
| Dateityp | |
|
|
| Dokument N° | 10.427.33.02RU |
| Titel | C-TOP B Контрольное устройство |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.09MU |
| Titel | VALID GUIDE SINCE JANUARY 2024 - Quick installation guide / Guía rápida de instalación / Guide d’installation rapide / Краткое руководство по монтажу C-TOP B |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.05MU |
| Titel | VALID GUIDE UNTIL JANUARY 2024 (PCB R - 8V9C0-3311000000) - Quick installation guide / Guía rápida de instalación / Guide d’installation rapide / Краткое руководство по монтажу C-TOP B |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.06ES |
| Titel | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO - CABEZAL DE CONTROL C-TOP B |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.06EN |
| Titel | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS - CONTROL HEAD C-TOP B |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.06FR |
| Titel | INSTRUCTIONS RELATIVES À L’INSTALLATION, À LA MISE EN SERVICE ET À LA MAINTENANCE - TÊTE DE COMMANDE C-TOP B |
| Dateityp | |
|
|
| Dokument N° | 10.427.30.06RU |
| Titel | ИНСТРУКЦИИ ПО УСТАНОВКЕ, ЭКСПЛУАТАЦИИ И ОБСЛУЖИВАНИЮ - КОНТРОЛЬНОЕ УСТРОЙСТВО C-TOP B |
| Dateityp | |
|
|
Verwandte Produkte
